STM32F2-MC-IPM30/UET motor control kit
Description:
The STM32F2-MC-IPM30/UET motor control kit consists of four parts: main control board, drive board, a PMSM motor and a JLINK debugger. The main board with 2.8’TFT LCD is based on ST MCU stm32f207zgt6. The drive board is mainly using IPM module to drive a PMSM motor or a BLDC motor. With the JTAG interface you can use debugger STLINKIII or JLINK test your program.
Features:
l MCU: STM32F207zgt6, 32BIT ARM CORTEX-M3
l With power input DC 18v~300V, typical 24V
l Large power drive: 600V 2KW IPM module
l Typical configure: 24V PMSM with 1000 pulses encoder
l With hall connector, encoder connector and UVW connector
l sin wave or square wave drive
l three shunt current sampling
l easy human interface: 2.8’ TFT LCD, 6 user keys, 4 LEDs, RXD TXD connector or DA channel output
l support BLDC, PMSM or ACIM motor control
l With rich examples. With ST FOC V3.2 examples and other easy examples.
Order NO: STM32F2-MC-IPM30/UET
简介:
STM32F2-MC-IPM30/UET 电机控制套件含四部分：主控制板、驱动板、一个PMSM电机和一个JLINK调试器。主控板上自带一个2.8‘TFT LCD，采用STM32F207ZGT6芯片。驱动板主要采用进口IPM模块驱动电机。用户可能过STLINK或JLINK下载程序并进行调试运行。
特点:
l 采用32位CORTEXM3内核的CPU：STM32F207ZGT6
l 采用核心板+主控底板+功率板结构，方便调试与维修
l 宽电压输入：DC 18V～300V,标配24V电源
l 大功率驱动：配置600V 2KW IPM功率模块，
l 典型配置： 24V PMSM 带HALL 及1000线编码器
l HALL输入、光电编码器输入，反电动势侦测，多种有/无传感器控制方式
l 120º方波、180º正弦波控制方式，FOC矢量控制方式
l 三电阻电流检测，过流停车保护（全隔离霍尔电流检测方式可选配）
l 方便的人机界面：TFT液晶显示、6按键、电位器、4个LED灯、串行通信接口
l 双电机控制接口，支持BLDC、PMSM、ACIM（三相交流异步）电机控制
l 例程非常丰富，包括自编的以源码方式提供的进阶式的例程，还有移植好ST FOCV3.2电机库例程。（本套件基本兼容ST官方双电机控制板）
订单编号：
l STM32F2-MC-IPM30/UET
|
