STM3237V-CRE/UET BOARD
Description:
The STM3237V-CRE/UET board has been designed as a complete demonstration and development platform for the ARM cortex-M4 core-based STM32F373VCT6 microcontroller. It features two I2Cs, two SPIs, three USARTs, one CAN, one 12-bit ADC, three 16-bit Sigma Delta ADCs, three 12-bit DACs, internal 32-KByte SRAM, and 256-KByte Flash. This evaluation board can be used as the reference design for user application development but it is not considered as a final application. With the JTAG interface you can use debugger STLINKIII or JLINKV8 to test your program.
Features:
l MCU: STM32F373VCT6 (100pin)
l Core work at up to 72M frequency
l 256KB Flash and 32KB RAM
l USB Device、SDIO interface
l l 2.4’ TFT LCD
l 1 CAN channel port
l 4 User Leds, 6 User Keys
l 1 Power Key, 1 Reset Key
l 1 Power Led
l 1 DV 5V power interface
l 1 I2C EEPROM 24C02
l 1 SPI FLASH AT45DB161
l 1 AD channel with Pointer
l l RTC with backup battery interface
l l JTAG Debug port
l l ALL I/O expansion
Order NO: STM3237V-CRE/UET
STM3237V-CRE/UET开发板是一块基于CORTEX-M4内核的STM32F373VCT6微处理器的开发平台。STM32F373VCT6 有2个I2C, 2个SPI,3个USART,1路CAN,3个16位Sigma Delta ADC转换器，1个12位ADC转换器，3个12位DAC转换器，内部有32KB SRAM, 256KB FLASH,支持JTAG调试。此评估平台可作为用户应用开发时做参考，而未作最终产品应用考虑。用户可通过JTAG用STLINK或JLINK仿真下载程序。
