STM3240V-CRE/UET BOARD
Description:
The STM3240V-CRE/UET board has been designed as a complete demonstration and development platform for the ARM cortex-M4 core-based STM32F407VGT6 microcontroller. It features three I2Cs, three SPIs, six USARTs, two CANs, three 12-bit ADCs, two 12-bit DACs, internal 192-KByte Data SRAM and 1MByte Flash, USB FS, JTAG debugging support. This evaluation board can be used as the reference design for user application development but it is not considered as a final application. With the JTAG interface you can use debugger STLINKIII or JLINKV8 to test your program.
Features:
l MCU: STM32F407VGT6 (100pin)
l Core work at up to 168M frequency
l 1MB Flash and 192KB RAM
l USB Device、SDIO interface
l l 2.8’ TFT LCD
l 1 CAN channel port
l 4 User Leds, 6 User Keys
l 1 Power Key, 1 Reset Key
l 1 Power Led
l 1 DV 5V power interface
l 1 I2C EEPROM 24C02
l 1 SPI FLASH AT45DB161
l 1 AD channel with Pointer
l l RTC with backup battery interface
l 1 camera OV9655 module
l USB OTG FS interface
l l JTAG Debug port
l l ALL I/O expansion
Order NO: STM3240V-CRE/UET
STM3240V-CRE/UET开发板是一块基于CORTEX-M4内核的STM32F407VGT6微处理器的开发平台。STM32F407VGT6 有3个I2C,3个SPI,6个USART,2路CAN,3个12位ADC转换器，2个12位DAC转换器，内部有192KB的Data SRAM，1MB的FLASH,支持USB FS和JTAG调试。此评估平台可作为用户应用开发时做参考，而未作最终产品应用考虑。用户可通过JTAG用STLINK或JLINK仿真下载程序。
