STM32-ETH-17V/UET CORE BOARD
Description:
The STM32-ETH-17V/UET core board is based on the ST chip STM32F107VCT6. All the GPIOS are lead out by 2.54mm pitch. The Ethernet and led flashing program is provided.
With the JTAG interface you can use debugger STLINKIII or JLINKV8 test your program.
Features:
l MCU: STM32F107VCT6 (100pin)
l STM32F107 Connectivity Line Cortex-m3 based microcontroller with embedded Ethernet MAC
l Core work at up to 72M frequency
l 256KB Flash and 64KB RAM
l Onboard 25 MHz crystal
l 1 Reset Key
l 1 Boot0 Key
l 1 Power Led
l 1 User Led
l USB connector (+5 V Power supply)
l Onboard 3.3 V LDO regulator
l 20 PIN JTAG Debug port
l supporting 100BASE-TX and 10BASE-TX
l Ethernet PHY :DP83848
l RJ45 connector
l RMII configuration
Order NO: STM32-ETH-17V/UET
STM32-ETH-17V/UET核心板使用ST芯片STM32F107VCT6。所有GPIO都能过2.54mm标准间距通过双排针引出。提供以太网程序和核心板灯闪程序。出厂为以太网程序。
