STM32-ETH-27V/UET CORE BOARD
Description:
The STM32-ETH-27V/UET core board is based on the ST chip STM32F207VGT6. All the GPIOS are lead out by 2.54mm pitch. The Ethernet and led flashing program is provided.
With the JTAG interface you can use debugger STLINKIII or JLINKV8 test your program.
Features:
l MCU: STM32F207VGT6 (100pin)
l Core work at up to 120M frequency
l 1MB Flash and 128+4KB RAM
l Onboard 25 MHz crystal
l 1 Reset Key
l 1 Boot0 Key
l 1 Power Led
l 1 User Led
l USB connector (+5 V Power supply)
l Onboard 3.3 V LDO regulator
l 20 PIN JTAG Debug port
l Ethernet PHY :DP83848
l RJ45 connector
l supporting 100BASE-TX and 10BASE-TX
Order NO: STM32-ETH-27V/UET
STM32-ETH-27V/UET核心板使用ST芯片STM32F207VGT6。所有GPIO都能过2.54mm标准间距通过双排针引出。提供以太网程序和核心板灯闪程序。出厂为以太网程序。
