STM32-X64-MC-13R/UET BOARD
Description:
The STM32-X64-MC-13R/UET board has been designed as a complete demonstration and development platform for the ARM cortex-M3 core-based STM32F103RBT6 microcontroller. It features two I2Cs, two SPIs, three USARTs, two 12-bit 16 channels ADCs, internal 20-KByte Data SRAM and 128-KByte Flash, JTAG SWD mode debugging support. This evaluation board can be used as the reference design for user application development but it is not considered as a final application. With the SWD interface you can use debugger STLINKIII or JLINKV8 to test your program.
Features:
l MCU: STM32F103RBT6 (64pin)
l Core work at up to 72M frequency
l 128KB Flash and 20KB RAM
l l 2.4’ TFT LCD
l 4 User Leds, 5 User Keys
l 1 Power Key, 1 Reset Key
l 1 Power Led
l 1 DV 5V power interface
l 1 I2C EEPROM 24C02
l 1 SPI SD card interface
l 1 AD channel with Pointer
l l RTC with backup battery interface
l With motor control connector
l l JTAG Debug port
l l ALL I/O expansion
Order NO: STM32-X64-MC-13R /UET
STM32-X64-MC-13R/UET开发板是一块基于CORTEX-M3内核的STM32F103RBT6微处理器的开发平台。STM32F103RBT6有2个I2C,2个SPI,3个USART, 2个12位16通道ADC转换器，内部有20KB的Data SRAM，128KB的FLASH,支持JTAG SWD模式调试。此评估平台可作为用户应用开发时做参考，而未作最终产品应用考虑。用户可通过SWD用STLINK或JLINK仿真下载程序。
